- High quality video
- Simultaneous H.264 and Motion JPEG
- Edge storage
- High resolution quad-view
- PTZ support
- Power over Ethernet
Efficient 16-channel solution
AXIS M7010 Video Encoder is an easy-to-use 16-channel video encoder with good video performance. It can simplify migration to network video without upgrading existing camera systems.
Affordable, yet powerful
AXIS M7010 provides edge storage through four microSDHC memory card slots. It supports all types of analog cameras including PTZ (pan/tilt/zoom) and PTZ domes. The video encoder features both RS-422 and RS-485 for controlling analog PTZ cameras.
The easy way to a smarter CCTV system
AXIS M7010 is perfect for large analog video installations, especially where an IP network infrastructure is already in place. It is powered over Ethernet using the same cable as for data transmission, which simplifies installation. A power supply is also included in the package.
Reduced bandwidth and storage
AXIS M7010 can deliver two simultaneous video streams, one in H.264 and another in Motion JPEG, at 15 frames per second in resolutions up to D1 (720x480 in NTSC, 720x576 in PAL). The H.264 video compression format drastically reduces bandwidth and storage requirements without compromising image quality. Motion JPEG is supported for increased flexibility.
Axis M7010 Kit 720 x 576pixels 15fps video servers/encoder
| M7010 Surveillance Kit, H.264/M-JPEG/MPEG-4, 15 fps, ARTPEC-4, 512MB RAM, 128MB Flash, 4x microSDHC, 28 W, PoE, 2.54 kg, AXIS Camera Station software with a 16-base license | |
| Manufacturer part number | 0414-043 |
|---|---|
| Vendor | Axis |
Certificates
Certification
EN 55022 B, EN 61000-3-2, EN 61000-3-3, EN 55024, EN61000-6-1, EN61000-6-2, EN 60950-1, C-tick AS/NZS CISPR 22, FCC Part 15 B B, ICES-003 B, VCCI B, KCC B, UL/IEC/EN 60950-1
Networking
Quality of Service (QoS) support
Y
Supported network protocols
IPv4/v6, HTTP, HTTPS, IEEE 802.1X QoS 3 DiffServ, FTP, SMTP, Bonjour, UPnP, SNMPv1/v2c v3(MIB-II), DNS, DynDNS, NTP, RTSP, RTP, TCP, UDP, IGMP, RTCP, ICMP, DHCP, ARP, SOCKS
Power over Ethernet (PoE)
Y
Copper ethernet cabling technology
100BASE-TX,10BASE-T
Operational conditions
Operating temperature (T-T)
0 - 50 °C
Operating relative humidity (H-H)
20 - 80%
Ports & interfaces
BNC input ports
16
Ethernet LAN (RJ-45) ports
4
DC-in jack
Y
RS-485 ports
4
RS-422 ports
4
Power
Power consumption (typical)
24 W
Power requirements
8 - 20 V DC
Processor
Built-in processor
4x ARTPEC-4
Security
Security algorithms
802.1x RADIUS
Video motion detection
Y
IP address filtering
Y
Active tampering alarm
Y
Technical details
Rotation
270°
Wall mountable
Y
Internal memory
2048 MB
Flash memory
512 MB
PTZ control (Pan/Tilt/Zoom)
Y
Image settings
Brightness, Color, Compression, Contrast, Mirroring, Privacy mask, Rotation
Video
Motion JPEG frame rate
15 fps
MPEG-4 frame rate
15 fps
Maximum video resolution
720 x 576 pixels
Maximum frame rate
15 fps
Weight & dimensions
Dimensions (WxDxH)
482 x 144 x 31 mm
Weight
2.54 kg
243SA Video Server
P7210 Video Encoder, H.264/M-JPEG/MPEG4, 30/25 (NTSC/PAL) fps, 4x ARTPEC-4, PTZ, 32 W, 2.54 kg
M7010 Video Encoder, H.264/M-JPEG/MPEG-4, 15 fps, ARTPEC-4, 512MB RAM, 128MB Flash, 4x microSDHC, 28 W, PoE, 2.54 kg
Intel Xeon E5-2609v3 1.9 GHz, 15MB Cache, RDIMM 2133 MT/s 2x4GB, 24 TB (6x4 TB) HDD